Integra DTR-7.8 instruction manual Changing the Input Display, First Time Setup—Continued, Notes

First Time Setup—Continued

5	Press the [Setup] button.
	Setup closes.
	S
	et
	u
	p

Notes:

•For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT 1 or 2, the HDMI Monitor setting must be set to No (see page 45). See page 27 for more information on video signal flow and upconversion.

•This procedure can also be performed on the AV receiver by using its [Setup], [Enter], and arrow but-

tons.

Changing the Input Display

If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or connect an RI Dock to the GAME/TV jacks, for to work properly, you must change this setting.

This setting can only be changed on the AV receiver.

1, 2 1, 2

1	Press the [Tape] or [Game/TV]
	input selector button so that
	“TAPE” or “GAME/TV” appears
	on the display.
	or

2

or

Press and hold down the [Tape] or [Game/TV] input selector but- ton (about 3 seconds) to change the setting.

Repeat this step to select MD, CDR, or DOCK.

For the Tape input selector, the setting changes in this order:

TAPE → MD → CDR

→	DOCK
	→

For the Game/TV input selector, the setting changes in this order:

GAME/TV ↔ DOCK

Note:

•DOCK can be selected for the Tape input selector or Game/TV input selector, but not both at the same time.

49