Integra DTR-7.8 instruction manual First Time Setup—Continued, Press the Receiver button, fol

First Time Setup—Continued

1	Press the [Receiver] button, fol-
Receiver	lowed by the [Setup] button.
	The main menu appears onscreen.
S
et
u
p
2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Input/Output

Assign,” and then press [Enter].

Enter

The Input/Output Assign menu appears.

Enter

Notes:

•Each HDMI IN cannot be assigned to more than one input selector.

•For composite video, S-Video, and component video upconversion for the HDMI OUT, the HDMI Monitor setting must be set to Yes (see page 45). See page 27 for more information on video signal flow and upconversion.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 50.

•This procedure can also be performed on the AV receiver by using its [Setup], [Enter], and arrow but- tons.

3

Enter

Enter

Use the Up and Down []/[ ] buttons to select “2. HDMI Input,” and then press [Enter].

The HDMI Input menu appears.

1-2.HDMI Input

DVD		---
VCR/DVR	---
CBL/SAT	---
GAME/TV	---
AUX1	---
AUX2	---

4		Use the Up and Down [ ]/[ ]
		buttons to select an input selec-
	Enter	tor, and use the Left and Right
		[ ]/[ ] buttons to select:
		IN1: Select if the video component
		is connected to HDMI IN 1.
		IN2: Select if the video component
		is connected to HDMI IN 2.
	Enter	IN3: Select if the video component
		is connected to HDMI IN 3.
		- - -:Select this to upconvert and
		output composite video,
		S-Video, and component
		video sources from the HDMI
5		OUT.
		Press the [Setup] button.
	S	Setup closes.
	et
	u
		p

47