C H A P T E R 2 Intel Express 100BASE- TX Stackable Hub
To remove a filler panel, loosen the screws on the front of the filler panel, grasp the tab on the front of the panel, and pull the filler panel out of the slot.
Intel 100BASE
Technology | by | |
Bay |
| |
| Networks | |
5914
Removing a filler panel
To install a filler panel, follow these steps:
1.Align the left and right edges of the filler panel in the card guides at the left and right of the slot.
2.Slide the filler panel in until the front panel of the filler panel is flush with the front panel of the hub.
3.Tighten the screws to secure the filler panel to the hub.
Inte 100BASE-
Technology by
Bay Networks
Installing filler panels
22
