P3 Series | User's Manual |
|
|
4.5.9 PC Health Status
Phoenix - AwardBIOS CMOS Setup Utility
| PC Health Status |
|
| |
*** FAN Control Setting *** |
|
| Item Help | |
FAN Mode Setting | [Full | On mode ] |
|
|
x Slop PWM 1 | 0.500 PWM | Menu Level | ► | |
x Temperature Limit of OFF | 0 |
| ||
|
|
| ||
x Temperature Limit of Start | 20 |
|
|
|
x Temperature Limit of Full | 80 |
|
|
|
x Fan Start PWM | 70 |
|
|
|
x Fan PWM Control | 100 |
|
|
|
*** System Health *** |
|
|
|
|
Sensor Show On Post | [Enabled] |
|
| |
Shutdown Temperature | [Enabled] |
|
| |
CPU VCORE: | 1.32 | V |
|
|
+5 V: | 4.97 | V |
|
|
+3.3 V : | 3.34 | V |
|
|
VDIMM: | 1.82 | V |
|
|
5VSB : | 4.99 | V |
|
|
VBAT : | 3.26 | V |
|
|
| 。 |
|
|
|
CPU Temp: | 31。C |
|
| |
SYS Temp: | 23 | C |
|
|
CPU FAN: | 1000 | RPM |
|
|
SYS FAN1: | 800 | RPM |
|
|
SYS FAN2: | 0 | RPM |
|
|
→← | :Move Enter:Select | ESC:Exit F1:General Help | |
↑↓ | |||
| F5: Previous Values | F6: | F7: Optimized Defaults |
・FAN Mode Setting
This item allows you to set the CPU fan states. When set to [Full on mode], the following items become selectable.
・All Voltages, Fans Speed and Thermal Monitoring
These unchangeable items list the current status of the CPU and environment temperatures, fan speeds, and system power voltage.
・Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature exceeds the settings value, system will force to shutdown to protect the processor not overheat.
・Sensor Show On Post
Show the system status when post.
- 35 -
