P3 Series |
|
|
|
|
| User's Manual | |
|
|
|
| ||||
4.5.8 PnP PCI Configuration |
|
|
| ||||
|
|
| Phoenix - AwardBIOS CMOS Setup Utility | ||||
|
|
|
| PnP/PCI Configurations |
| ||
Init Display First |
| [PCI Slot] | Item Help | ||||
Reset Configuration Data | [Disabled] | ||||||
| |||||||
Resources | Controlled By |
| [Auto(ESCD)] | Menu Level ► | |||
x IRQ | Resources |
| Press Enter | ||||
|
| ||||||
PCI/VGA | Palette Snoop |
| [Disabled] |
| |||
INT | Pin | 1 | Assignment |
| [Auto] |
| |
INT | Pin | 2 | Assignment |
| [Auto] |
| |
INT | Pin | 3 | Assignment |
| [Auto] |
| |
INT | Pin | 4 | Assignment |
| [Auto] |
| |
INT | Pin | 5 | Assignment |
| [Auto] |
| |
INT | Pin | 6 | Assignment |
| [Auto] |
| |
INT | Pin | 7 | Assignment |
| [Auto] |
| |
INT | Pin | 8 | Assignment |
| [Auto] |
| |
** PCI Express relative items ** |
| ||||||
Maximum | Payload Size |
| [128] |
| |||
→← |
|
|
|
|
| ESC:Exit F1:General Help | |
↑↓ :Move Enter:Select | |||||||
F5: Previous Values | F6: | F7: Optimized Defaults | |||||
・Init Display First
This setting specifies which graphics card is your primary graphics adapter. We suggest you to keep the default setting.
・Reset configuration data
Usually you'd better keep this setting [Disabled].
・Resource controlled by
The plug and play bios from Award can configure all the booting devices and plug and play devices automatically.
・IRQ Resources
Press <Enter> to enter the
Controlled By" sets to [Manual], this field is adjustable.
・PCI/VGA Palette Snoop
If this option sets to [Enabled], different VGA devices which work in different bus will manage the data from CPU with different palettes.
NOTE: This option can fix some issue that the VGA card is not standard .We suggest you to keep the default setting.
・Maximum Payload Size
This setting specifies the maximum TLP payload size for the PCI Express devices. The unit is byte.
- 34 -
