P3 SeriesUser's Manual
4.5.4 Advanced BIOS Features
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Hard Disk Boot Priority | Press Enter | Item Help | |
Virus Warning | [Disabled] |
| |
CPU L3 Cache | [Enabled] | Menu Level ► | |
Quick Power On Self Test | [Enabled] | ||
Select Hard Disk Boot | |||
First Boot Device | [CDROM] | ||
Device Priority | |||
Second Boot Device | [Hard Disk] | ||
| |||
Third Boot Device | [LS120] |
| |
Boot Other Device | [Enabled] |
| |
Boot Up Floppy Seek | [Disabled] |
| |
Boot Up NumLock Status | [On] |
| |
Gate A20 Option | [Fast] |
| |
Typematic Rate Setting | [Disabled] |
| |
x Typematic Rate (Chars/Sec) | 6 |
| |
x Typematic Delay (Msec) | 250 |
| |
Security Option | [Setup] |
| |
APIC Mode | Enabled |
| |
MPS Version Control For OS | [1.4] |
| |
OS Select For DRAM > 64MB |
| ||
Report No FDD For WIN 95 | [No] |
| |
Delay for HDD (Secs) | [ 2 ] |
| |
Full Screen LOGO Show | [Enabled] |
| |
Small Logo(EPA) Show | [Enabled] |
|
→← | :Move Enter:Select | F10:Save | ESC:Exit | F1:General Help | |
↑↓ | |||||
| F5: Previous Values | F6: | F7: Optimized Defaults | ||
・Hard Disk Boot Priority
This item selects the hard disks booting priority. By pressing <Enter> key, you can enter its submenu where the hard disks detected can be selected for the booting sequence to boot up system.
・Virus Warning
Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep.
・CPU L3 Cache
The L3 cache is among the processor and memory which is built in the mainboard. L3 is slower than L1 or L2.This option for enable or disable the L3 cache.
・Quick Power On Self Test
When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on the system. The BIOS shorten or skip some check during the POST.
- 25 -
