P3 Series | User's Manual | |
|
|
|
Enable Slots | Initialize slots 1 through 15. | |
30 | Size Base and Extended | Size base memory from 256K to 640K and extended memory |
| Memory | above 1MB. |
31 | Test Base and Extended | Test base memory from 256K to 640K and extended memory |
| Memory | above 1MB using various patterns. |
|
| NOTE: This test is skipped in EISA mode and can be skipped |
|
| with ESC key in ISA mode. |
32 | Test EISA Extended | If EISA Mode flag is set then test EISA memory found in slots |
| Memory | initialization. |
|
| NOTE: This test is skipped in ISA mode and can be skipped |
|
| with ESC key in EISA mode. |
Reserved |
| |
3C | Setup Enabled |
|
3D Initialize & Install Mouse | Detect if mouse is present, initialize mouse, install interrupt | |
|
| vectors. |
3E | Setup Cache Controller | Initialize cache controller. |
3F | Reserved |
|
BF | Chipset Initialization | Program chipset registers with Setup values. |
40 |
| Display virus protect disable or enable. |
41Initialize Floppy Drive & Initialize floppy disk drive controller and any drives.
Controller
42Initialize Hard Drive & initialize hard drive controller and any drives. Controller
43 | Detect & Initialize | Initialize any serial and parallel ports (also game port). |
| Serial/Parallel Ports |
|
44 | Reserved |
|
45 | Detect & Initialize Math | Initialize math coprocessor. |
| Coprocessor |
|
46Reserved
47Reserved
- 43 -