AUDIO1 | Intel 88ENEP3S00 specification

P3 Series	User's Manual

1.4Connecting Rear Panel I/O Devices

•PS/2 Mouse: Connect to PS/2 mouse.

•PS/2 Keyboard: Connect to PS/2 keyboard.

•COM: Connect to external model, mouse or other devices that support this communication protocol.

•Debug LED: Display error code. (please reference appendix 1)

•SPDIF IN: This connector provides an SPDIF-In connection through optical fiber to digital multimedia devices.

•SPDIF OUT: Connect to digital audio device.

•LAN: Connect to Local Area Network.

•USB: Connect to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc.

•eSATA: Connect to peripherial SATA devices.The peripherial SATA devices must connect inside SATA connectors. (Optional)

•AUDIO1:

Cen./Sub. (Center / Subwoofer): Connect to the center and subwoofer channel in the 7.1

channel audio system.

R.L./R.R. (Rear Left / Rear Right): Connect to the rear left and rear right channel in the 7.1

channel audio system.

S.L./S.R. (Surround Left / Surround Right): Connect to the surround left and surround right channel in the 7.1 channel audio system.

Line-In: Connect to the line out from external audio sources.

Line-Out: Connect to the front left and front right channel in the 7.1-channel or regular 2-channel audio system.

Mic-In: Connect to the plug from external microphone.

- 11 -

Image 12

Intel 88ENEP3S00, Intel P35/P31 Socket LGA775 Processor Mainboard user manual AUDIO1

Contents

P3 Series Disclaimer Copyright Table of Contents Package Checklist Introduction Specifications -1 For IP35-PRO CPU Specifications -2 For IP35-S Specifications -3 For IP31-CF Mainboard Layout -1 PCB Layout for IP35-PRO This picture is only for reference Mainboard Layout-2 PCB Layout for IP35-S Mainboard Layout-3 PCB Layout for IP31-CF Connecting Rear Panel I/O Devices AUDIO1 Installing Mainboard Choosing a Computer Chassis Installation of the CPU and CPU Cooler Installation of the CPU Installation of Memory Modules Installation of the CPU Cooler Connecting Peripheral Devices Floppy and IDE Disk Drive ConnectorsSerial ATA Connectors PCI and PCI Express slots Checking Jumper Settings Keyboard Power FunctionJKBCmos Memory Clearing Header FAN Power Connectors Front Panel Switches & Indicators Headers Additional USB Port Headers Front Panel Audio Connection Header Internal Audio Connectors ATX Power Input Connectors About Bios Setup To Run Bios SetupPost Power On Self Test About Cmos Bios Setup Cmos Setup Utility Load Fail-Safe Defaults Load Optimized DefaultsSet Supervisor Password Set User Password ・ Date mmddyy ・ Time hhmmss IDE Channel 0 Master/Slave,SATA Channel 1~4 Access Mode IDE HDD Auto-DetectionCapacity Cylinder ・ Hard Disk Boot Priority ・ Apic Mode ・ System Bios Cacheable PCI-E Compliancy Mode・ Memory Hole At 15M-16M PCI Express Root Port Func IDE HDD Block Mode IDE DMA transfer accessOnChip IDE Device IDE Primary Master/Slave PIO Back to Integrated Peripherals Setup Menu Onboard Device IDE Primary Master/Slave Udma AutoOn-Chip Secondary PCI IDE IDE Secondary Master/Slave PIO Back to Integrated Peripherals Setup Menu Super IO Device Onboard FDC ControllerOnboard Serial Port Parallel Port Mode EPP Mode SelectECP Mode Use DMA ・ Hot Key Power on ・ Power Management ・ Acpi Function・ Acpi Suspend Type ・ Suspend Mode ・ HDD Power Down・ Power On by Ring ・ Resume by Alarm ・ Reset configuration data ・ Init Display First・ Resource controlled by ・ IRQ Resources ・ FAN Mode Setting ・ Shutdown Temperature・ Sensor Show On Post ・ CPU Feature ・ CPU Clock Mode・ Ajust Cpu Voltage ・ Ajust Dram Voltage Set Supervisor/User Password Enter Password Password DISABLED！ Driver Installation Exit Post Codes Hex Name Description Initialize INT 00h-1Fh according to Inttbl Test base memory from 256K to 640K and extended memory E1-EF