IXD1110 Demo Board
5.0IXF1110 Software
The IXF1110 software allows access to the following register blocks through the Graphical User Interface (GUI) or the Serial Monitor (HyperTerminal) interface:
•MAC Control
•MAC RX Statistics
•MAC TX Statistics
•Global Status and Configuration
•RX Block
•TX Block
•
•SerDes Block
•GBIC Block
For additional information on all of the registers, please refer to the IXF1110 Datasheet or
Note: For help on using IXF1110 software, refer to the
5.1PC Requirements
The following is a list of the minimum PC requirements for installation of the IXF1110 software:
•Intel® Pentium® II 400 MHz or equivalent
•128 MB RAM
•16 MB Video Card
•Serial port
•Microsoft* Windows 98, 2000 operating system
Note: Microsoft* Windows 95, ME, NT, and XP have not been tested.
•Microsoft* Windows HyperTerminal
•1024 x 768 minimum viewing resolution
Development Kit Manual | 15 |
Document Number: 250807
Revision Number: 003
Revision Date: June 27, 2003