IXD1110 Demo Board
1.0Introduction
This document describes all the necessary requirements, settings, and procedures for evaluating the Intel® IXF1110
Intel® IXD1110 demo board. For immediate operation, refer to Section 2.0, “Quick Start” on page 11. For optional configurations, see Section 6.0, “Optional Configurations” on page 18.
The IXD1110 demo board kit includes a CPU daughter card that attaches to the underside of the board. Through the CPU daughter card, the Intel® IXF1010/IXF1110
Additional sections include information about LEDs, test points, board schematics, and a bill of materials.
Note: For comprehensive information in evaluating the IXF1110 using the IXD1110 demo board, use the IXF1110 Demonstration Software Help File and the IXF1110 Datasheet (document number 250210) in conjunction with this document.
1.1About This Kit
The IXD1110 demo board kit includes the following:
•IXD1110 demo board with CPU daughter card
•IXF1110 Demonstration Software CD (includes a software help file)
•
•IXD1110 Demo Board Development Kit Manual
1.2Additional Equipment Required
The following additional equipment is required for board setup:
•Packet Generator with
•3.3 V DC power supply with 6A current capability
•2.5 V DC power supply with 6A current capability
•1.8 V DC power supply with 6A current capability
•One to ten fiber cables (for data transmission)
•Two
•
•PC (for IXF1110 software) (see Section 5.1, “PC Requirements” on page 15)
•GBIC SFP modules [up to 10] (Agilent*
Development Kit Manual | 7 |
Document Number: 250807
Revision Number: 003
Revision Date: June 27, 2003