Intel IXD1110 Demo Board, Parity None Stops bits Flow Control None, Development Kit Manual

Models: IXD1110

1 40
Download 40 pages 707 b
Page 17
Image 17
•Parity: None

IXD1110 Demo Board

Parity: None

Stops bits: 1

Flow Control: None

3. Press the reset button switch SW1. The following message appears on the HyperTerminal:

MPC8xx PlanetCore Boot Loader v2.00

Copyright 2001 Embedded Planet. All rights reserved. DRAM available size = 16 MB

wvCV

DRAM OK

Autoboot in 2 seconds.

ESC to abort, SPACE or ENTER to go.

4.Press the ESC key to stop the Autoboot. The following message appears on the HyperTerminal:

Autoboot aborted.

>

5.Type the following at the > prompt:

>set ip 10.254.21.34 (Changes the IP address to the value entered)

>store (Permanently changes the IP address)

>reset (Restarts the IXD1110 demo board)

Once the Autoboot is complete, the GUI can access the IXD1110 demo board using the newly programmed IP address.

Development Kit Manual

17

Document Number: 250807

Revision Number: 003

Revision Date: June 27, 2003

Page 17
Image 17
Intel manual IXD1110 Demo Board, Parity None Stops bits Flow Control None, Development Kit Manual