Intel MS-6112 manual Chapter

CHAPTER 2 HARDWARE INSTALLATION

Step 5: Install the Heat Sink with Fan to the Processor.

Push down the metal clips, so that they are in line with the back of the Heat Sink. Be careful, so as not detach the metal clips from the Heat Sink.

Heat Sink w/ Fan

Heat Sink

Base Holder

Metal Clips

âTheshouldarrowbe pointing down.

In case the metal clips are detached from the Heat Sink, re-attach them. Look for the arrow on the metal clip. This arrow should be pointing down and aligned with the Heat Sink Support Base Holder.

Attach the Heat Sink to the processor.

Clip Holder

Secure holes

Clip Holder

S.E.C. Cartridge - Thermal P

Isometric View

Pentium® II processor (Back)

Metal Clips Ear

Secure

Posts

Metal Clips Ear

Heat Sink w/ Fan(Back)

-Look at the back of the Heat Sink and take note of the 2 secure posts. Insert these 2 Secure posts to the 2 secure holes on the back of the processor.

-Align the ears of the metal clips with the clip holders on the back of the processor. Use a screw driver to push the metal clips onto the clip holders. Check for a perfect fit.

2-6