Intel MS-6112 manual 2.8-2Remote Power On/Off Switches JSW1/JSW2

CHAPTER 2 HARDWARE INSTALLATION

2.8-2 Remote Power On/Off Switches: JSW1/JSW2

Connect to a 2-pin push button switch. Every time the switch is shorted by pushing it once, the power supply will change its status from OFF to ON.

During ON stage, push once and the system goes to sleep mode: pushing it more than 4 seconds will change its status from ON to OFF. If you want to change the setup, you could go to the BIOS Power Management Setup.

This is used for ATX type power supply.

JSW1

JSW2

Note: The two switches are provided by the mainboard for your convenience, so you can use any of them. The two switches have the same feature.

2-28