CHAPTER 3 | AMI® BIOS USER’S GUIDE |
EPP Version
This option is for setting which EPP version will be used. The settings are 1.7 and 1.9.
Parallel Port Mode
This option allows user to choose the operating mode of the onbaord parallel port. The settings are Normal, SPP/EPP or ECP mode.
Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can select the interrupt line for onboard parallel port. We suggest that the user select the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at | Parallel Port IRQ |
|
|
LPT1(378H) | 7 |
LPT2(278H) | 5 |
|
|
LPT3(3BCH) | 5 |
|
|
Parallel Port DMA Channel
This option allows user to choose DMA channel 1 to 3 for the onboard parallel port on ECP mode.
Onboard IDE
Set this option to enable or disable on board IDE controller.
