CHAPTER 2 | HARDWARE INSTALLATION |
|
|
2.1-1 CPU Installation Procedures
There are two kinds of Pentium® II processor that is currently used: the OEM Pentium® II processor and the Boxed Pentium® II processor. OEM Pentium® II processor has no Heat Sink, Fan and Heat Sink Support, while the Boxed Pentium® II processor is provided with Heat Sink w/ fan and Heat Sink Support.
A. OEM Pentium® II processor Installation Procedures
Processor
Lock
Pentium® II
Processor
Heat Sink
Support
Top Bar
Heat Sink
Support Base
Heat Sink
Support Pin
Heat Sink
W/Fan
Notch Hole
Retention Mechanism
Required Things:
Pentium® II processor - Processor.
*Retention Mechanism(RM) - Plastic Guide that holds the S.E.C. Catridge in the Slot 1 connector.
*Retention Mechanism Attach Mount(RMAM) - Bolt/Bridge assemblies inserted up through the bottom of the motherboard. RM secures to RMAM ( 2 RMAM required per RM ).
*Heat Sink Support Base (HSSBASE) - Plastic support bar mounted to the mainboard under the ATX heatsink. (One leg is always bigger than the other one)
