Intel VIA 8237, PT800DBP, PT800DBZ, VIA PT800 user manual 4Standard Cmos Features, Date, Time

Day Month Date Year

3-4Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software

Standard CMOS Features

Date (mm:dd:yy)	Mon,	Nov	, 24 2003	Item Help
Time (hh:mm:ss)	16 :	45	: 35
> IDE Primary Master	Press Enter None
> IDE Primary Slave	Press Enter None			Menu Level >
> IDE Secondary Master	Press Enter None
> IDE Secondary Slave	Press Enter None			Change the day, month,
Drive A	1.44M, 3.25 in.
				year and century
Drive B	None
Video	EGA/VGA
Halt On	All,But Keyboard
Base Memory	640K
Extended Memory	56320K
Total Memory	57344K

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Date

The date format is <day><month><date><year>.

Day of the week, from Sun to Sat, determined by BIOS. Read-only. The month from Jan. through Dec.

The date from 1 to 31 can be keyed by numeric function keys. The year depends on the year of the BIOS.

Time

The time format is <hour><minute><second>.

Primary Master/Primary Slave

Secondary Master/Secondary Slave

Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use Manual to define your own drive type manually.

If you select Manual, related information is asked to be entered to the following items. Enter the information directly from the keyboard. This information should be provided in the documentation from your hard disk vendor or the system manufacturer.

If the controller of HDD interface is SCSI, the selection shall be “None”.

If the controller of HDD interface is CD-ROM, the selection shall be “None”

23