Pin 1

(3) ATX P9 Power Connector (6-pin block) : ATXP1

This is a new defined 6-pins connector that usually comes with ATX Power Supply. The ATX Power Supply which fully support Pentium 4 processor must including this connector for support extra 3.3V and 5V voltage to maintain system power consumption. Without this connector might cause system unstable because the power supply can not provide sufficient current for system.

GND GND GND 3.3V 3.3V 5V

BLK BLK

BLK ORG

ORG RED

Power Connector on Motherboard

Power Plugs from Power Supply

(4)PS/2 Mouse & PS/2 Keyboard Connector: PS2KBM The connectors for PS/2 keyboard and PS/2 Mouse.

(5)USB Port connector: USB

The connectors are 4-pin connector that connect USB devices to the system board.

(6)LAN Port connector: LAN (only for PT800DBP/PT800DBZ) This connector is standard RJ45 connector for Network

(7)Parallel Port Connector (25-pin female): PARALLEL

Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS SETUP” section for more detail information.

(8) Audio Connector : AUDIO_GAME

This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC and a 15-pin D-Subminiature Receptacle Connector for joystick/MIDI Device.

Line-out :Audio output to speaker

Line-in :Audio input to sound chip

MIC : Microphone Connector

Game/MIDI : For joystick or MIDI Device

13

Page 18
Image 18
Intel VIA 8237, PT800DBP, PT800DBZ, VIA PT800 user manual ATX P9 Power Connector 6-pin block ATXP1, Audio Connector Audiogame