SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By choosing “ECP”, the onboard parallel port will operate in ECP mode only. Choosing “ECP+EPP” will allow the onboard parallel port to support both the ECP and EPP modes simultaneously. The ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP feature. After selecting it, the following message will appear: “ECP Mode Use DMA” at this time, the user can choose between DMA channels 3 to 1. The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the following message will be displayed on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C)
Power Management Setup
|
|
|
|
| |
ACPI Function |
| Enabled |
| Item Help | |
Video Off Option | Suspend | ||||
| |||||
Video off Method | V/H SYNC+Blank | Menu Level > | |||
MODEM Use IRQ | 3 |
| |||
Power Button Function |
| ||||
State After Power Failure | Auto |
| |||
> Wake Up Events | Press Enter |
| |||
|
|
|
|
| |
↑↓→← Move Enter:Select
F5:Previous Values | F6:Optimized Defaults F7:Standard Defaults |
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend → off, All Modes → Off, and Always On.
33
