WAN port MDI/MDIX switch Four LAN ports: 10/100 Mbps Two USB 2.0 port
Reset Button
Power Button
Power Jack - DC 12V
LEDs: Link/Activity LEDs for Each Ethernet Port, Power LED, HD (Hard Disk) LED, HB
WAN Port
The WAN port is used to connect to an ADSL/Cable modem for linking to the Internet.
WAN MDI/MDIX Switch
The WAN MDI/MDIX switch is used to adjust the cable connection of the WAN port. If the port is connected to hub, you should move the switch to the “hub” side; if the port is connected to PC like machine, you should move the switch to the “PC” side. As for the four LAN ports, there is no need to add additional switches for each cable connection. This is because the LAN ports support auto MDI/MDIX.
LAN Ports
The LAN ports are used to connect to a PC, server, hub, switch or other network devices on the intranet.
Reset Button
If you forget your password and/or IP settings, you will not be able to access the SA. You can use the Reset Button to restore the factory settings. To
6
© INTELLINET NETWORK SOLUTIONS
