UPHOLSTERY | PROCEDURE 10 |
This Procedure includes the following:
Seat Upholstery Replacement
Back Upholstery Replacement
WARNING
AfterANYadjustments,repairorserviceandBEFORE use,makesureallattachinghardwareistightened
Upholstery MUST be inspected BEFORE each use.
SEAT UPHOLSTERY REPLACEMENT (FIGURE 1)
1.Remove seat cushion and back upholstery from chair.
2.Unlatch the four (4) fastening flaps that secure the seat upholstery to the seat frame.
3.Remove the existing seat upholstery.
4.Install the new seat upholstery making sure that the three (3) fastening flaps that are in close proximity to one another are to the rear of the seat frame.
5.Secure the four (4) fastening flaps together.
6.Reinstall back upholstery and seat cushion onto chair.
Back Upholstery
Large
Strap
Toward
Rear of
Seat
Frame
Towards
Front of
Chair
Three (3) Seat Upholstery Fastening Straps
Towards Rear of Seat Frame
FIGURE 1 - SEAT UPHOLSTERY REPLACEMENT
BACK UPHOLSTERY REPLACEMENT
All Excelerators Except XLT/XLT 2000 Narrow Back (FIGURE 2)
1.Unlatch the two (2) fastening flaps that secure the bottom of existing back upholstery to the back canes.
2.Unlatch the top of the existing back upholstery.
3.Lift up on the existing back upholstery and remove from the wheelchair.
4.Install the new back upholstery onto the wheelchair.
5.Securely latch the fastening flaps on the bottom of the new back upholstery to the back canes.
Back Upholstery
Fastening
Flap
Fastening
Flap
Back
Canes
FIGURE 2 - BACK UPHOLSTERY REPLACEMENT -
ALL EXCELERATORS EXCEPT XLT/XLT 2000
NARROW BACK
EXCELERATOR XLT/XLT 2000 Narrow Back (FIGURE 3)
1.Pull the back cushion off the back frame.
2.Align the fastening strips on the back frame with the fastening strips on the new back cushion.
3.Press the back cushion firmly against the back frame to secure.
Back
Cushion
Back Fastening Strips
Frame
FIGURE 3 - EXCELERATOR XLT/XLT 2000
U P H O L S T E R Y
25
