Invacare PH904A, PHW93 manual Installing and Removing a Seating System, Installing Stroller Handle

SECTION 6—BACK/SEAT

Installing and Removing a Seating System

WARNING

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

1.Ensure that the seating system is compatible with this wheelchair.

2.Refer to the seating system Ownerʹs Manual for installation and removal.

Installing Stroller Handle

NOTE: For this procedure, refer to FIGURE 6.2.

1.Remove the plug buttons from both back canes, if necessary.

2.Slide the stroller handle into the back canes.

3.Align the mounting holes of the stroller handle and the back canes.

4.Press the button on the quick-release pin and insert the quick-release pin through the back cane and stroller handle.

5.Release the button on the quick-release pin.

6.Pull on the stroller handle to make sure it is locked securely in place.

Stroller Handle

Mounting Holes

Button

Back Cane

Quick-Release Pin

FIGURE 6.2 Installing Stroller Handle

Compass™SPT™ 48 Part No 1122134