SECTION 4—FRONT RIGGINGS

Removing

1.Push the legrest release handle inward while rotating the elevating legrest outward.

2.Lift the legrest assembly out of the mounting tube of the wheelchair frame.

3.Repeat STEPS 1-2 for opposite side, if necessary.

Mounting Pin

 

Release Handle

Elevating Legrest

 

Mounting Tube

Inside of Wheelchair

NOTE: The mounting tube will be part of the seat frame or wheelchair front frame depending on wheelchair model.

FIGURE 4.9 Replacing Sector Block

Raising/Lowering the Elevating Legrest

NOTE: For this procedure, refer to FIGURE 4.10.

1.Perform one of the following:

Raising: Lift legrest assembly up to desired height.

Lowering: Lift elevating legrest assembly up with one hand. While supporting the elevating legrest assembly (and user’s leg), pull release lever up with other hand and lower legrest assembly to desired height.

Release Lever

Elevating Legrest Assembly

FIGURE 4.10 Raising/Lowering the Elevating Legrest

Compass™SPT™

36

Part No 1122134

Page 36
Image 36
Invacare PH904A, PHW93 manual Raising/Lowering the Elevating Legrest, Replacing Sector Block