SECTION 5—ARMS

3.Lock the armrest assembly by pressing the release lever into the down (vertical) position as shown in Detail “A”.

4.Pull up on the armrest assembly to ensure the armrest is locked in place.

5.Repeat STEPS 1-4 for opposite side of wheelchair, if necessary.

DETAIL “A”

Dual Point Arm

Height

Adjustment

Locked - DownLever

(Vertical)

Unlocked - Up

Front Socket

Arm Release

Rear Arm

Socket

(Horizontal)

Arm

Lever

 

FIGURE 5.1 Using/Adjusting Dual Point Arms

Replacing Dual Point Arm Pad

NOTE: For this procedure, refer to FIGURE 5.2 on page 41.

1.Remove the mounting screws that secure the arm pad to the armrest assembly.

2.Replace arm pad and securely tighten with the existing mounting screws.

Replacing Dual Point Arm Clothing Guards

NOTE: For this procedure, refer to FIGURE 5.2 on page 41.

NOTE: This procedure is for fixed height dual point arms ONLY.

1.Remove the four screws that secure the existing clothing guard to the armrest assembly.

 

Arm Pad

Screws

Armrest

Assembly

 

Clothing

Mounting

Guard

Screws

Screws

FIGURE 5.2 Replacing Dual Point Arm

Pad/Replacing Dual Point Arm Clothing

Guards

Part No 1122134

41

Compass™SPT™

Page 41
Image 41
Invacare PHW93, PH904A manual Replacing Dual Point Arm Pad, Replacing Dual Point Arm Clothing Guards