SECTION 4—FRONT RIGGINGS

Adjusting Footplate Height and Calfpad Height/Depth

NOTE: For this procedure, refer to FIGURE 4.11.

Adjusting the Footplate Height

1.Loosen locknut and washer securing the slide tube to the elevating legrest.

2.Reposition footplate to desired height securely tighten locknut and washer.

3.If necessary, repeat STEPS 1-2 to adjust remaining footplate height.

Adjusting Calfpad Height

1.Loosen the mounting bolt and washer that secure the calfpad bracket to the elevating legrest assembly.

2.Slide the calfpad bracket up or down until the desired calfpad height is obtained.

3.Tighten the mounting bolt and washer securing the calfpad bracket to the elevating legrest assembly.

4.If necessary, repeat STEPS 1-3 to adjust remaining calfpad bracket.

Adjusting Calfpad Depth

1.Remove the mounting screw, spacer and locknut that secure the calfpad to the calfpad bracket.

2.Insert mounting screw through one of four calfpad bracket mounting holes.

3.Using the mounting screw spacer and locknut, secure the calfpad to the calfpad bracket.

4.If necessary, repeat STEPS 1-3 to adjust remaining calfpad assembly.

Spacer

Calfpad Bracket

 

 

Mounting Bolt and Washer

Calfpad

Elevating Legrest Assembly

 

 

Mounting Screw

Locknut

Locknut and Washer

 

Slide Tube

Calfpad Bracket Mounting Holes

Footplate

FIGURE 4.11 Adjusting Footplate Height and Calfpad Height/Depth

Part No 1122134

37

Compass™SPT™

Page 37
Image 37
Invacare PHW93, PH904A manual Adjusting Footplate Height and Calfpad Height/Depth, Adjusting the Footplate Height