Invacare XPO100B user manual Polarized Plug Instruction

Models: XPO100B XPO100

1 48
Download 48 pages 17.07 Kb
Page 10
Image 10

SECTION 1—GENERAL GUIDELINES

Other devices may experience interference from even the low levels of electromagnetic emissions permitted by the above standards. To determine if the emissions from the XPO2 are

causing the interference, turn the XPO2 Off. If the interference

with the other device(s) stops, then the XPO2 is causing the

interference. In such rare cases, interference may be reduced or corrected by one of the following measures:

Reposition, relocate, or increase the separation between the equipment.

Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected.

DO NOT connect the concentrator in parallel or series with other oxygen concentrators or oxygen therapy devices.

Close supervision is necessary when this product is used near children or physically‐challenged individuals.

Additional monitoring or attention may be required for patients using this device who are unable to hear or see alarms or communicate discomfort.

Be aware that electrical cords and/or tubing could present a tripping hazard.

A change in altitude may affect total oxygen available to you. Consult your physician before traveling to higher or lower altitudes to determine if your flow settings should be changed.

Polarized Plug Instruction

As a safety feature, this appliance may have a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.

Invacare XPO2

10

Part No 1148112

Page 10
Image 10
Invacare XPO100B user manual Polarized Plug Instruction