Step 4: Mounting the Receiver to a Wall (Optional)
1.Refer the drawing at right that has relative position of the main holes that will be needed to be drilled into the wall.
2.Drill two 1/4” pilot holes.
3.Insert the supplied two Anchors into the wall. If necessary, use a small hammer to lightly tap the anchors flush to the wall.
4.Insert two screws into the anchors. Leave 1/4” length for mounting the Transmitter, 5/8” for the Receiver.
5.Place receiver main holes over the protruding screws and slide down into position.
15
