Ironman Fitness V2 instruction manual Wireless Siren Auto Test

To test signal strength/coverage of the main unit to Siren follow the procedure below.

Wireless Siren Auto Test

1.

2.

Set dipswitches 1 and 5 to on.

The strobe on the siren will flash every 5 seconds, and the main unit will beep out the signal strength every 5 seconds. The beeps range from 1-10. The minimum acceptable strength is 3.

Note: if the 3 beeps are not achieved, relocate the siren slightly. If the 3 beeps are still not achieved then relocate the siren closer to the main unit.

28