Ironman Fitness V2 instruction manual Step A- Register Your Alarm System

Step 5: Connecting To The SecureNet Digital Monitoring Centre

Once the Main Control Unit is installed, your Watchguard Digital Alarm System is ready to be connected to the SecureNet Digital Monitoring Centre. The SecureNet Digital Monitoring Centre dramatically increases the protection provided by your Watchguard Digital acting, as a link between you, your security system and guard, police, fire or medical emergency services.

Once you have set up your notification rules and account details, when your alarm system is triggered, the SecureNet Digital Monitoring Centre will immediately contact you via phone, email or SMS and you will be informed of the alarm time, location and type. You will also be able to send a guard to inspect your premises if at any time you are unable or feel it is unsafe to do so yourself. Before you can connect to the SecureNet DIGITAL MONITORING CENTRE your Main Control Unit must be connected to a phone line that is capable of dialling 1900 and 1300 numbers. Once your phone line is connected, you should follow the steps below to register with the SecureNet Digital Monitoring Centre.

*Note: occasionally your alarm panel will need to dial the SecureNet Digital Monitoring Centre to send alarm and panel information such as the weekly test report. This means that the connected phone line will occasionally be busy for approximately 30 seconds.

Step A- Register Your Alarm System

Please visit www.watchguardalarms.com.au and then click on the ‘Register’ button to begin the 3-step on-line registration process. You will need the serial number from the sticker located at the front of the main control unit. Important Note: If you cannot register via the internet, simply call 1300 653 533 to complete a phone registration.

29