Zone Feature Programming
Zone Feature Programming can be used to set all the different combinations of alarm modes.
Simply put the corresponding zones dipswitch up, and press the tamper to change the features. For every press of the tamper, the feature will increment to the next, the number of beep(s) heard correspond to the feature that you have activated:
ZONE FEATURE PROGRAMMING
1. | Set the dipswitch for the zone you wish to program. |
|
| TAMPER | Press the tamper until the desired feature is reached. |
|
| |
2. |
| For every press of the tamper, the feature will increment |
| to the next, the number of beep(s) heard correspond to | |
|
| |
|
| the feature that you have activated. |
Beeps Alarm Mode
1Zone is now active in both home and away modes
2Zone is now only active in home mode
3Zone is now only active in away mode
4Zone is now only 24 hour zone
5Zone is now active in home and away modes, with 30 sec entry delay
6Zone is now active in home only, with 30 sec entry delay
7Zone is now active in away only, with 30 sec entry delay
44