8-6
Time Protocols
SNTP: Viewing, Selecting, and Configuri ng
Time Protocols
Figure 8-4. The System Information Screen (Default Values)
2. Press [E] (for Edit). The cursor moves to the System Name field.
3. Use [v] to move the cursor to the Time Sync Method field.
4. Use the Space bar to select SNTP, then press [v] once to display and move
to the SNTP Mode field.
5. Do one of the following:
•Use the Space bar to select the Broadcast mode, then press [v] to
move the cursor to the Poll Interval field, and go to step 6. (For
Broadcast mode details, see "SNTP Oper ating Modes" on page 2.)
•Use the Space bar to select the Unicast mode, then do the
following:
i. Press [>] to move the cursor to the Server Address field.
Time Protocol Selection Parameter
–TIMEP
–SNTP
–None