8-15
Time Protocols
TimeP: Viewing, Selecting, and Configuring
Time Protocols
Figure 8-12. The System Information Screen (Default Values)
2. Press [E] (for Edit). The cursor moves to the System Name field.
3. Use [v] to move the cursor to the Time Sync Method field.
4. If TIMEP is not already selected, use the Space bar to select TIMEP, then
press [v] once to display and move to the TimeP Mo de field.
5. Do one of the following:
•Use the Space bar to select the DHCP mode, then press [v] to move
the cursor to the Poll Interval field, and go to step 6.
•Use the Space bar to select the Manual mode.
i. Press [>] to move the cursor to the Server Address field.
ii. Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
Time Protocol Selection Parameter
–TIMEP (the default)
–SNTP
–None