18-18
Troubleshooting
Using the Event Log To Identify Problem Source s
Troubleshooting
The log status line at the bottom of the display identifies where in the
sequence of event messages the display is currently positioned.
To display various portions of the Event Log, either preceding or following the
currently visible portion, use either the actions listed at the bottom of the
display (Next page, Prev page, or End), or the keys described in the following
table:
Table 18-2. Event Log Control Keys
CLI:Using the CLI, you can list
■Events recorded since the last boot of the switch
■All events recorded
■Event entries containing a specific keyword, either since the last boot or
all events recorded
Syntax: show logging [-a] [<search-text>]
HP4108> show logging Lists recorded log messages since
last reboot.
HP4108> show logging -a Lists all recorded log messages,
including those before the last
reboot.
HP4108> show logging -a system Lists log messages with "system"
in the text or modulename.
HP4108> show logging system Lists all log messages since the
last reboot that have "system" in
the text or module name.
Key Action
[N] Advance the display by one page (next page).
[P] Roll back the di splay by one page (previous page).
[v] Advance display by one event (down one line).
[^] Roll back displ ay by one event (up one line).
[E] Advance to the end of the log.
[H] Display Help for the event log.