4-5
Using the HP Web Browser Interface
Starting an HP Web Browser Interface Session with the Switch
Using the HP Web Browser
Interface
Starting an HP Web Browser Interface Session with the Switch
You can start a web browser session in the following ways:
■Using a standalone web browser on a network connection from a PC or
UNIX workstation:
•Directly connected to your network
•Connected through remote access to your network
■Using a management station running HP TopTools for Hubs & Switches
on your network

Using a Standalone Web Browser in a PC or UNIX

Workstation

This procedure assumes that you have a supported web browser (page 4-4 )
installed on your PC or workstation, and that an IP address has been config-
ured on the switch. (For more on assigning an IP address, refer to "IP
Configuration" on page 7-3.)
1. Make sure the JavaTM applets are enabled for your browser. If they are
not, use the options menu in your browser to do the following:
•In Netscape, enable the Java and JavaScript options.
•In Microsoft Internet Explorer, enable the Java Permissions.
Refer to your selected browser’s on line Help for specific information on
enabling the Java applets.