13-26
HP Procurve Stack Management
HP Procurve Stack Management
HP Procurve Stack
Management
Figure 13-17. The eXecute Comm and Displays the Console Main Menu for the
Selected Stack Member
2. You can now make configuration changes and/or view status data for the
selected Member in the same way that you would if you were directly
connected or telnetted into the switch.
3. When you are finished accessing the selected Member, do the following
to return to the Commander’s Stack Access screen:
a. Return to the Member’s Main Menu.
b. Press [0] (for Logout), then [Y] (for Yes).
c. Press [Return].
You should now see the Commander’s Stack Access screen. (For an
example, see figure 13-16 on page 13-25.)
Converting a Commander or Member to a Member of Another Stack
When moving a commander, the following procedure retur ns the stack mem-
bers to Candidate status (with Auto-Join set to “No”) and converts the stack
Commander to a Member of another stack. When moving a member, the
procedure simply pulls a Member out of one stack and pu shes it into another.
1. From the Main Menu of the switch you w ant to move, select
9. Stacking
2. To determine the MAC address of the destination Commander, select
2. Stacking Status (All)
Main Menu for stack
Member named "Coral Sea"
(SN = 1 from figure 13-16)