Jenn-Air FCG20500, FCG20100, FCG20510 manual If surface burner falls to light

Check the following list to be sure a service call is really necessary.

If surface burner falls to light:

•check to be sure uni_is properly connected to power supply.

•check for a blown circuit fuse or a tripped main circuit breaker.

•check to be sure burner is correctly rated for your type of gas.

•check to be sure burner ports or ignition ports are not clogged.

•checktobesureigniterisdryandclicking. Bumerwillnotlightifigniterisdamaged, soiled or wet. If igniter doesn'tclick, turn control knob OFF.

If the flame is uneven:

•burnerports may be clogged.

•flame settingmay need to be adjusted,

If surface burner flame lifts off the ports:

•checkto be sure a pot is sittingon the grate above,

•contact an authorizedJenn-AirService Contractor.

if surface burner flame is yellow in color:

•contact an authorizedJenn-AirService Contractor,

If nothing on the range operates:

•check for a blowncircuit fuse or a tripped main circuitbreaker.

•check if range is properly connected to electric circuit in house.

If clock, indicator words, and/or lights operate but oven does not heat:

•the controlsmay have been set incorrectly,

•clock controls may be set for delayed start of oven.

If the oven light does not work:

•the lightbulb is loose or defective,

•oven light does not work duringself-cleaningprocess,

If oven will not go through self-cleaning process:

•controlsmay be improperlyset.

•door may not be locked.

•checkthe "Clean"and "Stop"time settingsand the currenttimeof dayon the clock.

If oven did not clean properly:

•oven may need longer cleaningtime.

•excessivespillswere not removed pdor to se_f-cleanlngprocess.

If oven door will not unlock:

•oven may not have cooled to safe temperatureafter self-cleaningprocess.

38