•With one hand, carefully lift the glass panel to disengage it from the location points under the handle.
•With your other hand, hold the outer door to ensure it does not spring shut on removing the inner panel.
• Close the oven door.
Warning! If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local service force centre who will be pleased to advise further.
To replace the inner door glass
Holding the glass panel in your right hand fully open the oven door with your left.
Gently ease and push the glass into the location points under the handle before lowering and sliding the glass into position under the hinge location points at the rear.
Ensure the glass is properly located and the text 'Top' is facing towards you and at the top edge of the door.
Warning! Do not attempt to use the oven without the glass being in place.
Replacing an oven light bulb (main oven)
The type of bulb required is a 300°C 25 watt small Edison Screw.
Warning! Disconnect the appliance from the electricity supply before replacing the bulb.
1.Make sure the appliance is cool before replacing the bulb.
2.Open the oven door and remove the shelves and wirework runners.
3.Pull the glass bulb cover towards you and then pull it off. If necessary, use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.Unscrew the bulb by turning it to the left.
5.Fit a new bulb and then replace the glass bulb cover.
6.Refit the wirework runners and replace the shelves.
7.Restore the electricity supply and reset the time of day.
38
