John Lewis JLBIDO911 Preparing cabinet for fitting of oven, Cooker point OvenHob

•By connecting the appliance to a cooker point (having a double pole isolating switch with at least 3mm contact separation in all poles) and protected with a fuse or miniature circuit breaker at your mains fuse box.

•If you wish to connect an oven and a hob to a cooker point you can. Oven and hob units should be separately connected to a cooker point.

Cooker point

OvenHob

Important! It is good practice to

•Fit an Earth Leakage Circuit Breaker to your house wiring.

•Wire your appliance to the latest IEE regulations.

Preparing cabinet for fitting of oven

•Make sure that the cabinet is the correct size for the appliance to be fitted.

•If the size is between 565-570mm, then the cabinet should be modified so that at the screw fixing points the recommended dimension of at least 560-565mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.

•The cabinet must be stable and level by firmly securing it to the wall or floor. If necessary, make arrangements to ensure the shelf upon which the oven will rest is level.

•When the appliance is installed ensure a minimum gap of 2mm is maintained between the trim on the bottom edge of the appliance, and any corresponding door / panel underneath.

42