Cleaners that contain bleach should not be used as they may dull the surface finishes. Harsh abrasive and scourers should also be avoided.
Cleaning the outside of the appliance
Do not use abrasive cleaning materials e.g. abrasive cream cleaners, wire wool pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, control knobs, handles, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking, finish with a soft cloth.
Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.
Removing and replacing the wirework runners
1.Remove all shelves and furniture from the oven.
2.Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.
3.Unhook the runner at the top and remove from the cavity.
4.To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.
Warning! Ensure the wirework runners are firmly in position before replacing the oven shelves.
Cleaning the shelves, wire-work runners and grill/oven furniture
All removable parts, except the grill pan handle can be washed in the dishwasher. The grill pan, grill pan grid, oven shelves and wirework runners may be cleaned using a soap impregnated steel wool pad. Soaking first in hot soapy water will make cleaning easier.
Cleaning inside the grill and oven compartments
The sides and back of the grill/second oven and main oven compartments are coated with a special Stayclean coating. They should not be cleaned manually.
The vitreous enamel main oven base and grill compartment base can be cleaned using normal oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.
Warning! Aerosol cleaners must not come into contact with elements, the door seal, or any painted finishes as this may cause damage.
Warning! Aerosol cleaners must not be used on
•To carry out the cleaning cycle, remove the oven shelves and set the oven to CAtA which is the cleaning setting.
•Press the Function selector until the required setting is illuminated.
•The display will show CAtA and the heat indicator will scroll until the required temperature is reached.
36
