•To place the appliance into the cabinet follow the procedure:
Important! Two people will be required to carry out the lifting procedure.
Warning! Warning: Do not attempt to lift this appliance by the handle(s).
•Each person should squat either side of the appliance.
•Tilt the appliance so that your hands can support the underside of the appliance.
•Keeping your back straight, raise the appliance to the correct height by straightening at the knees.
•Rest the rear underside of the appliance on the cabinet floor while your hands support the front.
•The appliance can be pushed fully into the cabinet. Take care to avoid fouling the mains lead.
•Ensure the appliance is central and level.
•Do not remove spacers fitted behind fixing holes.
•When the appliance is fully housed screw the stability screws (supplied with the appliance) into the side of the cabinet taking care not to distort the side trims. It is advisable to turn each screw alternatively to avoid damaging the trims. Fixing point for stability screws
Fixing point for stability screws
•Switch on the appliance then refer to the operating instructions.
Technical data
Voltage:
Wattage:
Height:
Width:
Depth: (excluding handles and knobs)
Weight
5.9- 6.4 kW 900mm 600mm 600mm 55kg
This appliance complies with: | EMC Directive 89/336/EEC CE |
European Council Directive 73/23/ | Marking Directive 93/68/EEC |
EEC | Energy Label Directive 2002/40/EC |
46
