Johnson Controls TM9V MP changesare required, be, length should be cut off, Upflow As Received

438335-UIM-B-0509

sure to cap all un-used openings.	so that no sagging loops will collect	to not operate.
changesare required, be	length should be cut off	will cause the furnace

For 060 & 080K input furnaces, the condensate is plumbed toward the right casing outlet from the

1 Shorten rain gutter hose.	Re-route and shorten pressure switch hose.	INDUCER ROTATED FOR RIGHT SIDE VENTING
	2

drain factory.

Condensate drain may exit cabinet on either side. UPFLOW AS RECEIVED

When drain hose routing If rerouting hoses - excess and hold condensate, which

.factory the from outlet casing left the toward plumbed is drain condensate the furnaces, input 120K 100, For

2 Shorten pressure switch hose. 1 Move rain gutter hose to this position. INDUCER ROTATED FOR LEFT SIDE VENTING

FIGURE 24: Upflow Configuration

18 Johnson Controls Unitary Products