20
Johnson Controls Unitary Products
FIGURE 26: Horizontal Left Configuration
When drain hose routing changes are required, be sure to cap all unused openings.
If rerouting hoses - excess length should be cut off so that no sagging loops will collect and hold condensate, which will cause the furnace to not operate.
HORIZONTAL - LEFT
INDUCER ROTATED
|
| 1 |
AIRFLOW |
| Move rain gutter hose to this |
|
| position NOTE: May require hose |
|
| extension that is provided with |
2 Move pressure switch hose |
| wider cabinets. |
|
| |
to this position. |
|
|
NOTE: May require the longer |
|
|
hose that is provided with |
|
|
wider cabinets. |
|
|
|
| 4 Change condensate |
1 Move rain gutter | 3 | drain connection to |
hose to this position. | the 90° fitting provided. | |
| Move condensate | |
|
|
drain hose to this position.
2
AIRFLOW | Move pressure switch | |
hose to this position. | ||
| ||
| NOTE: May require the longer | |
| hose that is provided with | |
| wider cabinets. |
|
| HORIZONTAL - LEFT |
|
| INDUCER AS RECEIVED |
3 | 4 | 5 Change condensate drain |
Move rain gutter hose to this position | Move condensate | connection to the 90° fitting |
NOTE: May require hose extension | drain hose to this | provided. |
that is provided with wider cabinets. | position. |
|