Johnson Controls XP-910x, XT-9100 appendix AO Source With DX-9100 Only AO Notes

AO: Source

(with DX-9100

Only)

AO Notes

The source of the analog output signal is defined in the DX-9100 Controller.

Via the GX Tool

Select XTn, AOn, Data, and the “Source Point” field. Enter * and select the required source variable.

Via the SX Tool

Refer to the Extension Module Configuration section of the DX-9100 Configuration Guide (LIT-6364030).

1.When the XT-9100 is connected to a DX-9100 Controller, you can view and override the AO value from the DX-9100 front panel. See Display Panel and Keypads in the DX-9100 Extended Digital Controller Technical Bulletin (LIT-6364020).

2.The analog output values can be read in percent at Item AOn (RI.20-27) with the SX Tool.

18Configuration Guides—XT-9100 Configuration Guide