Log Set Installation
NOTE: If appropriate, install the optional Antique Brick Panel Kit before assembling the logset.
The GF 400 DV Sebago logset must be installed before operating the burner. The logset includes five log pieces, packaged inside the firebox, and a quantity of ember stones packaged in the Miscellaneous Parts bag.
To install the log set, remove the packaging and place the parts inside the firebox as illustrated in figs
The ember stones realistically simulate glowing coals when the burner is operating. These should be spread evenly over the burner plate and around the logs. DO NOT OBSTRUCT THE PILOT ASSEMBLY OPENING. See fig. 37.
NOTE: You do not need to use all the ember stones. With experimentation, you will find the arrangement and quantity of embers that works best with your stove. Depending upon the characteristics of your installation, it is possible that too many ember stones can promote sooting on the logs. Adjust the quantity of ember stones as appropriate to maintain the best overall flame picture.
THE CERAMIC FIBER LOGS AND GLOWING EMBERS CAN IRRITATE YOUR SKIN. GENTLY WASH YOUR HANDS WITH WARM SOAPY WATER AFTER HANDLING THE LOGS.
Figure 32. Install Right Log
Figure 33. Install Rear Log
Figure 34. Install Left Log
Figure 35. Install Middle Log
Figure 36. Install Crossover Log
Pilot
Opening
DO NOT
OBSTRUCT
Figure 37. Install Ember Stones
21
