Operation

Familiarize yourself with the controls of the GF 400 DV Sebago. Make sure that anyone else using the appliance is also familiar with the controls and operation proce- dures. Always follow the Lighting Instructions on the inside back cover of this manual and also located on the Rating Plate attached to the back of the stove.

1.	Once the pilot is lit, burner operation is controlled by
	the rocker switch located at the left rear corner of the
	stove. Use the T-STAT position for the optional thermo-
	static or remote control functions. See fig. 39.
2.	During the first few fires, you may notice odor and/or
	smoke from the stove. This is normal and results from
	burn-off of manufacturing residue and curing of
	materials. You may find it helpful to provide addi-
	tional ventilation and fresh air to alleviate this condi-
	tion.
3.	Condensation may occur on the glass upon each	Figure 39. Burner Switch and Optional Blower Controls
	lighting of the appliance. This “fog” will disappear as	Figure 39. Burner Switch and Optional Blower Controls

the appliance heats up.

4.Keep the controls and the area under the appliance free of debris, vacuum this area frequently. Always keep the appliance area clear and free from combus- tible materials, gasoline and other flammable liquids.

If a vacuum is used during any service on the stove, ALWAYS be sure the stove is cold and there are NO hot embers.

5. Remember, this appliance has a continuous burning pilot flame. Exercise caution when using products having combustible vapors. Always shut-off gas supply while servicing the stove.

6.CAUTION: DO NOT OPERATE THIS APPLIANCE WITH THE GLASS REMOVED CRACKED OR BROKEN. Replacement of the glass should be done by a licensed or qualified service person. Use only replacement glass provided by your authorized Jøtul dealer. Never use any substitute materials.

WARNING: OBSERVE CAUTION WITH THE GLASS. THE GLASS PANEL MAY SHATTER UNEXPECTEDLY IF STRUCK WITH AN OBJECT. ALWAYS HANDLE THE GLASS PANEL WITH CARE. WHEN SERVICING THE STOVE ALWAYS PULL THE GLASS ASSEMBLY STRAIGHT UP FOR RE- MOVAL.

7.Clean the glass only when necessary. Wipe surface with a clean, damp soft cloth. Follow with a dry, soft towel as desired. Take care not to scratch the glass surface.

WARNING: DO NOT USE ABRASIVE CLEANERS ON THE GLASS. NEVER CLEAN THE GLASS WHEN IT IS HOT.

Jotul GF 400 DV manual Operation

Models: GF 400 DV

Operation