Figure 28. Lift the Burner Skirt up and out of the firebox.
Pull Frame Spring | Air Shutter |
Latch to release. | Wingnut |
4. Change the Pilot Orifice:
•FROM WITHIN THE FIREBOX, disengage the Pilot Hood by releasing the retainer clip as shown in fig. 32. Using the 4 mm hex key supplied, unscrew the pilot orifice (counter- clockwise). Replace with the appropriate orifice:
#51 for Natural gas #30 for Propane
Tighten new orifice into the base of the pilot assembly.
•Replace Pilot Hood by pushing it into the base.
Pilot Hood
Pilot Orifice
Retainer Clip
Figure 29. Frame latch and air shutter stem location.
| PILOT ASSEMBLY |
Burner Tube | Figure 32. Pilot Orifice replacement. |
| Air |
| Shutter |
Figure 30. Move shutter forward to disengage the burner tube assembly. .
Burner Orifice
Figure 31. Move air shutter back to access the burner orifice.
17