Jotul GZ 550 DV II manual Operation, Burner Controls

Models: GZ 550 DV II

1 32
Download 32 pages 22.29 Kb
Page 25
Image 25
Operation

Operation

1.Your Acadia gas fireplace can be operated manu- ally using the On/Off/T-stat rocker switch or it can be automatically controlled using an optional wall-mounted thermostat and/or remote control device. A separate switch is provided for the optional forced air blower kit.

Familiarize yourself with the location and func- tion of the controls. See Figs. 51 and 52.

Gas Control - Used to control the Pilot light and gas flow from the supply line.

Regulator - Allows you to adjust heat output and flame intensity.

Piezo Ignitor - Push button pilot light ignition.

ON/OFF/ T’STAT Switch - Allows for manual or thermostatic control of the burner.

Always follow the Lighting Instructions located on the inside Back Cover of this manual.

2.For the first several hours of operation, it is common that you will detect some odor as the metal and manufacturing materials cure under heat. This condition is temporary and can be alleviated by allowing plenty of fresh air to circulate through the area.

3.Condensation may develop on the glass upon each lighting of the appliance. This “fog” will disappear as the glass heats.

4.Keep the controls and the area under the appli- ance free of debris; vacuum this area frequently. Always keep the appliance area clear and free from combustible materials, gasoline and other flammable liquids.

When a vacuum is used on any service for the fireplace, ALWAYS be sure the fireplace is com- pletely cold.

5.Remember, your fireplace utilizes a continuously burning pilot flame. Exercise caution when using household products containing combustible vapors.

6.CAUTION: DO NOT OPERATE THIS APPLIANCE WITH THE GLASS REMOVED, CRACKED OR BRO- KEN. REPLACEMENT OF THE GLASS SHOULD BE DONE BY A LICENSED OR QUALIFIED SERVICE PERSON. USE ONLY REPLACEMENT GLASS PRO- VIDED BY YOUR AUTHORIZED JØTUL DEALER. NEVER USE ANY SUBSTITUTE MATERIALS.

Pilot Assembly

Figure 51. The pilot assembly is located at the right rear corner of the burner plate under the right log.

Gas Control

 

Knob

Regulator

IGNITOR

BURNER

 

ON

 

OFF

 

TSTAT

HI

LO

Piezo Ignitor

On/Off/T’stat Switch

 

Figure 52. Burner Controls.

WARNING:

OBSERVE CAUTION NEAR THE GLASS PANEL. THE GLASS MAY SHATTER WHEN STRUCK BY AN OBJECT. ALWAYS HANDLE THE GLASS PANEL WITH CARE.

25

Page 25
Image 25
Jotul GZ 550 DV II manual Operation, Burner Controls