Only For Qualified Installers
Look through hole in end of log to see if a spark jumps from the ignitor electrode to the pilot when the ignitor
TROUBLE SHOOTING
Pilot does not light after many tries
No | Check ignitor wire and | Bad Reconnect or replace |
| connections from piezo ignitor | Ignitor wire. |
| to ignitor ceramic at pilot. | |
|
|
button is pushed.
Yes
Is gas turned "on"?
Yes
Is there gas in tank (LP) or line (NG)
Yes
Purge gas line to stove
OK
Check pilot orfice and pilot line for blockage.
OK
Check Ignitor Ceramic for cracks
OK
Check Piezi Ignitor to make sure the small wire on the mounting flange is grounded.
OK
Replace Pirzo Ignitor
No
Turn on gas valve
No
Replenish supply
Bad
Bad
Replace
Clean paint or rust from around mounting hole.
42