Only For Qualified Installers | INSTALLATION |
Assembling the Victorian Face
1.Position the mantel face down on the floor.
2.Place the left piller over the two studs on the left side of the mantel. Install two washers and nuts and tighten.
3.Place the left side of the breast plate into the slots on the left pillar.
4.Place the Left hinge pin of the top grill door into the round hole in the pillar.
5.Place the left hinge pin of the bottom grill door into the round hole in the bottom of the pillar.
6.Place the right pillar over the studs on the right side of the mantel face while simultaneously placing right ends of the doors and breast plate into their slots on the right pillar. Some assis- tance is helpful.
7.Install any decorative panels at this time.
16
