|
| Troubleshooting |
|
| |
|
|
|
PROBLEMS | CHECK | |
Screen is 80% black | The Closed Caption Text mode is on. Turn it off in the CLOSED CAPTION Menu, see page 36. | |
| ||
Stereo or bilingual pro- Make sure the MTS settings are correct. See “MTS” on page 43. | ||
grams cannot be heard |
|
|
There is no sound from the TV’s speakers
The TV Speaker option may be turned off. See page 44.
Static electricity | It is normal to feel static electricity if you brush or touch the screen. |
|
|
You hear occasional | It is normal for the TV to make crackling sounds when first turned on or off. Unless the sound or picture |
crackling sounds |
|
The following are not malfunctions.
•The television may make a creaking sound if the temperature of the room or the temperature of the inside of the television changes. If there is no problem with the screen or sound, then there is no need to worry.
•There lamp may make a noise when it blows, but this is not dangerous.
•The lamp may make a noise when the power is turned on and a picture is displayed on the screen. This noise is caused when the mercury which is inside the lamp is heated and is not a malfunction.
•The still parts of the picture may remain on the screen. This is a characteristic of ILA elements and not a mal- function. The picture will disappear over time.
•The operation of this television is not guaranteed below 0°C. If the power is turned on when the temperature is below 0°C, the picture may be disturbed. Use the television when the temperature is 0°C or higher.
•Although the
•There is a cooling fan
•Although the picture may be temporarily disturbed and noise may be seen on the screen if the power is turned on immediately after it has been turned off, this is not a malfunction.
If the POWER LED and/or the ON TIMER LED on the front panel of the television are blinking, there is a problem with the television.
Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television.
How the LED indicators are blinking | Trouble |
The ON TIMER LED and POWER LED are blinking | It is possible that the lamp has not been installed correctly, or it may be a |
alternately. | malfunction. |
|
|
The ON TIMER LED and POWER LED are lit at the | It may be a malfunction. |
same time. |
|
|
|
The ON TIMER LED is blinking. | It may be a malfunction. |
|
|
The POWER LED is blinking. | It may be a malfunction. |
|
|
When you try to turn the power on, the cooling mode | The lamp may be blown. Replace it with a new lamp. |
is entered and the power does not turn on. | The filter unit may not be installed correctly. |
| The filter unit may be broken. Replace with a new filter unit. |
|
|
57
