JVC CA-MD70 manual Connecting Speakers, To connect an outside AM antenna, English

English

Continued

AM antenna Connecting Speakers

	Vinyl-covered wire
	(not supplied)
	ANTENNA
GND	AM EXT	FM
	AM	75
		COAXIAL
	LOOP
AM loop antenna (supplied)

1 Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2 Turn the AM loop antenna until you have the best reception.

To connect an outside AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

You can connect the speakers using the speaker cords.

2		3, 4
Red		Speaker cord
Speaker cord
RIGHT	LEFT
Black		SPEAKERS
Right speaker		Left speaker

1 Twist the core of the cord at the end of each cord, then remove the insulation.

2 Open the speaker terminal.

3 Insert the end of the speaker cord to the terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

4 Close the speaker terminal on the rear of the unit.

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

– 7 –